委托技术服务合同范本(汇总20篇)

最新农业技术服务合同

甲方：_________

乙方：_________

为了发展农村商品生产，提高_________生产的技术水平，提高经济效益，经甲乙双方充分协商，特签订本合同，以便双方共同遵守。

一、应甲方邀请，乙方到甲方居住地传授_________生产的技术，合同期限为_________年_________月，即从_________年_________月_________日起至_________年_________月_________日止。

二、至合同期满，乙方保证甲方达到如下技术水平：_________。

三、甲方负责提供乙方传授_________生产技术所必需的资金_________元，提供生产设备_________，保障_________原料的及时供应.甲方应严格服从乙方的技术指导。

四、在合同执行期间，甲方每月付给乙方报酬_________元，按月结算(或合同期届满统一结算)。乙方的食宿由甲方负责安排，费用由_________方负担。

五、合同期届满，如乙方的传授指导没有达到合同规定的技术要求，除退回甲方付给的报酬，赔偿甲方的一切损失外，还应向甲方偿付违约金_________元。如乙方中止执行合同，除应赔偿甲方的一切费用支出外，应向甲方偿付违约金_________元。如甲方不按合同规定的时间付给乙方报酬，迟付一日，应按迟付金额的_________%偿付给乙方违约金.如甲方中止执行合同，应付给乙方合同期内的全部报酬。

六、合同生效后，任何一方不得任意变更或解除合同，合同中如有未尽事宜，须经甲乙双方共同协商，作出补充规定，补充规定与本合同具有同等效力。

七、如遇人力不可抗拒的灾害造成合同无法履行时，由双方协商解决。

八、其他：_________。

本合同正本一式两份，甲乙双方各执一份。(如经过公证)_________各留存一份。

甲方(签章)：_________ 乙方(签章)：_________

_________年____月____日 _________年____月____日

国际技术服务合同模板2篇

随着现代科学技术的发展，产品结构日益改善，技术精度和复杂程度不断提高，技术服务已从单纯的售后服务发展为售前服务，即在新产品的设计论证阶段就将技术服务的要求列为一项重要内容，并随着设计、试制和生产阶段的进行而逐步具体化，因此在产品交付使用时就能提供一整套基本完善的技术服务。以下是第一范文网小编今天为大家精心准备的：2篇国际技术服务合同模板。内容仅供参考，欢迎阅读!

国际技术服务合同模板一

甲方：________________

地址：________________

电话：________________

法定代表人：__________

国籍：________________

乙方：________________

地址：________________

电话：________________

法定代表人：__________

国籍：________________

甲乙双方在平等、互利基础上，经协商一致达成如下技术服务合同。

第一条 技术人员

1.应甲方邀请，乙方同意派遣________名工程师组成的________技术服务组，于________年____月____日赴________(甲方国名)的________市(或某工地);

2.在________(甲方国名)，受甲方邀请的乙方________技术服务人员应有准备，并且愿意同________甲方的________公司共同工作。

第二条 法律约束

乙方人员在________(甲方国名)期间，应服从甲方国家的法律，受甲方的管理规章制度约束。

第三条 费用支付

1.

(1)甲方负责向乙方人员支付乙方提出的每人每月________(币别)的免税技术服务费。

(2)上述免税技术服务费的________%应以美元(或英镑)支付。

(3)本款(1)项提及的技术服务费自乙方人员到达________(甲方国名)之日起开始计算。

2.

(1)在甲方服务期间，乙方人员在工作或业余的全部时间内，应保证行为端正。

(2)甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。

第四条 旅费

甲方负担乙方人员往返________和________(甲方国名)的国际旅费和每人不超过20公斤的超重行李费并负责安排机票。

第五条 汇兑

1.第三条1款(1)项中所提及的技术服务费的________%应以________币(即甲方的国币)支付给在________的乙方技术服务组，其余________%应由甲方按银行当日公布的汇率折成美元(或英镑)。

2.所折成的美元(或英镑)应电汇________银行转汇________(乙方所在城市)________银行营业部________公司(即乙方公司)________号帐户。

3.甲方应以书面形式将汇款情况通知乙方国驻甲方国大使馆经参处。

第六条 权利和义务

甲、乙双方执行合同期间，甲方同意：

1.为乙方技术服务组人员免费提供设备齐全的住宿;

2.为乙方技术服务组人员免费提供交通工具;

3.免费提供乙方必要和充分的劳保用品;

4.为乙方技术人员免费提供人寿保险;

5.为乙方技术服务组人员免费提供足够的办公设施和用品;

6.在指定的医院或诊所为技术服务组人员提供免费医疗，但不包括镶牙、配眼镜和性病的治疗。

7.乙方技术服务组人员因公出差，应按照甲方人员待遇，发给出差补助费，以________币(甲方国币)支付给乙方技术服务组。

第七条 休假

合同期间，乙方技术人员享受________、________两国的全部公共假日。

1.乙方人员每年享受30天的休假，工资照发(从开始工作之日算起工作11个月，第12个月为休假)。休假期间工资应全部以美元(或英镑)支付。

2.乙方技术人员每年应得________元(甲方国币)的奖金，奖金的________%以美元(或英镑)支付。

3.在甲方服务期间，甲方为乙方技术人员回国休假提供往返经济舱机票。

第八条 移民费用

甲方同意为乙方人员办理移民手续，其中包括：

1.办理出入境签证;

2.为乙方人员办理合同规定雇用期间的长期居住许可;

3.承担本条1、2款所产生的费用。

第九条 事假

在合同期间内，乙方技术人员由于家庭不幸和/或其他原因，可请紧急事假10天。

1.准予乙方人员事假时，甲方不负责：

(1)乙方事假人员旅费;

(2)本合同所规定的技术服务费;

(3)因乙方人员事假期满后不能返回________(甲方国名)而换人所需的费用。

2.乙方应负责：

(1)从国内另行换人，替换不能返回甲方服务的技术人员;

(2)承担换人所需的全部费用;

(3)因乙方人员事假期满后不能返回________(甲方国名)而换人所需的费用。

3.

(1)在合同期间内，由于甲方或所在国原因，致使乙方人员不能工作时，甲方同意：向乙方技术人员支付双方同意的技术服务费;

(2)因甲方原因终止合同、甲方违反合同或阻碍合同履行时，甲方同意：

a.按合同规定费用，向乙方人员支付3个月的技术服务费;

b.执行本合同第四条的规定。

第十条 工伤、事故及人员更换

1.乙方技术人员因身体不好或工伤，在2个月内不能痊愈时，乙方同意：

(1)从中国另行派人替换上述人员;

(2)承担替换人员从________(乙方国名)到________(甲方国名)的旅费。

(3)甲方同意承担因病或工伤回国的乙方人员的旅费。

2.在合同期间内，技术服务组人员因工伤致残或死亡，甲方同意：

(1)处理事故、工伤或死亡的一切善后事宜;

(2)负担所产生的费用;

(3)按________(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。

第十一条 其他约定

本合同未尽事宜，由双方通过友好协商解决。

双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产生或与本合同有关的其他事项，应根据________(甲方国名)的现行法律，提交________仲裁机关解决。

第十二条 期限

本合同的执行从____年____月____日开始，有效期限共____年，此为第一阶段。

____年合同期满后，双方应进一步商定延续合同期限和与之有关的条件。

第十三条 本合同共两份，分别用中、________文写成，双方各执一份，两种文本具有同等效力，并对双方均有约束力。

甲方公司名称：________________

乙方公司名称：________________

代表人：______________________

__________年_______月_______日

国际技术服务合同模板二

合同登记编号：

技术服务合同(20xx版，含技术培训、技术中介)

项目名称：_____________________________

委托人：

(甲方) _______________________________

受托人

(乙方)_________________________________

签订地点： 省(市) 区(县)

签订日期： 年 月 日

有效期限： 年 月 日至 年 月 日

上海市科学技术委员会

上海市工商行政管理局

甲方公司名称：________________

乙方公司名称：________________

代表人签名：______________________

__________年_______月_______日

国际技术服务合同（2）

在____注册成立的____公司(以下简称甲方)和中国____公司(以下简称乙方)、于____年____月____日签订本技术服务合同：

第一条

1.应甲方邀请，乙方同意派遣____名工程师组成的中国技术服务组，于___年____月____日赴____(甲方国名)的____(市)(或某工地);

2.在____(甲方国名)，受甲方邀请的乙方中国技术服务人员应有准备，并且愿意同____甲方的____公司共同工作。

第二条

乙方人员在____(甲方国名)期间，应服从甲方国家的法律，受甲方的管理规章制度约束。

第三条

1.(1)甲方负责向乙方人员支付乙方提出的每人每月____(币别)的免税技术服务费。

(2)上述免税技术服务费的____%应以美元(或英镑)支付。

(3)本条(1)款提及的技术服务费自乙方人员到达____(甲方国名)之日起开始计算。

2.(1)在甲方服务期间，乙方人员在工作或业余的全部时间内，应保证行为端正。

(2)甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。

第四条

甲方负担乙方人员往返中国和____(甲方国名)的国际旅费和每人不超过20公斤的超重行李费，并负责安排机票。

第五条

1.第三条1(1)款中所提的技术服务费的____%应以____币(即甲方的国币)支付给在____的中国服务组，其余____%应由甲方按银行当日公布的兑率折成美元(或英镑)。

2.所折成的美元(或英镑)应电汇____(如伦敦)中国银行转汇北京(或其它中国城市)中国银行营业部____公司(即乙方公司)____号帐户。

3.甲方应以书面形式将汇票情况通知中国驻甲方国大使馆经参处。

第六条

甲、乙双方执行合同期间，甲方同意：

1.为乙方技术服务组人员免费提供设备齐全的住宿;

2.为乙方技术服务组人员免费提供交通工具;

3.免费提供乙方必要和充分的劳保用品;

4.为乙方技术人员免费提供人寿保险;

5.为乙方技术服务人员免费提供足够的办公设施和用品;

6.在指定的医院或诊所为技术服务组人员提供免费医疗，但，不包括镶牙、配镜和性病的治疗。

7.乙方技术服务组人员因公出差，应按照甲方人员待遇，发给出差补助费，以____币(甲方国币)支付给乙方技术服务组。

第七条

合同期间，乙方技术人员享受中、____(甲方国名)两国的全部公共假日。

第八条

1.乙方人员每年享受三十天的休假，工资照发(从开始工作之日算起工作十一个月，第十二个月为休假)。休假间工资应全部以美元(或英镑)支付。

2.乙方技术人员每年应得____元(甲方国币)的奖金，奖金的____%以美元(或英镑)支付。

3.在甲方服务期间，甲方为乙方技术人员回国休假提供往返经济舱机票。

第九条

甲方还同意为乙方人员办理移民手续，其中包括：

1.办理出入境签证;

2.为乙方人员办理合同规定雇用期间的长期居住许可;

3.承担本条1和2款所产生的费用。

第十条

在合同期间内，乙方技术人员由于家庭不幸和/或其它原因，可请紧急事假十天。

1.准予乙方人员事假时，甲方不负责：

(1)乙方事假人员旅费;

(2)本合同第三条1(1)款中所规定的技术服务费;

(3)因乙方人员事假期满后不能返回____(甲方国名)而换人时所需费用。

2.乙方应负责：

(1)从国内另行换人，替换不能返回甲方服务的技术人员;

(2)承担换人所需的全部费用。

(3)因乙方人员事假期满后不能返回____(甲方国名)而换人时所产生的费用。

3.(1)在合同期间内，由于甲方或所在国原因，致使乙方人员不能工作时，甲方同意：向乙方技术人员支付双方同意的技术服务费(见第三条1(1)款);

(2)因甲方原因终止合同、甲方违反合同或阻挠合同履行时，甲方同意：

a.按合同规定费用，向乙方人员支付三个月的技术服务费(见第三条1(1)款);

b.执行本合同第四条的规定。

第十一条

1.乙方技术人员因身体不好或工伤，在两个月内不能痊愈时，乙方同意：

(1)从中国另行派人替换上述人员;

(2)承担替换人员从中国到____(甲方国名)的旅费。

(3)甲方同意承担因病或工伤返回中国人员的旅费。

2.在合同期间内，技术服务组人员因工伤致残或死亡，甲方同意：

(1)处理事故、工伤或死亡的一切善后事宜;

(2)负担所产生的费用;

(3)按____(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。

第十二条

本合同未尽事宜，由双方通过友好协商解决。

双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产生或与本合同有关的其它事项，应根据____(甲方国名)的现行法律，提交双方均能接受的唯一仲裁人解决。

第十三条

本合同的执行从____年____月____日开始，有效期限共____年，此为第一阶段。

____年合同期满后，双方应进一步商定延续合同期限和与之有关的条件。

第十四条

本合同共两份，分别用中、____文写成，双方各执一份。两种文本具有同等效力，并对双方均有约束力。

甲乙双方于上述日期签字盖章为证。

甲方签字人：____

甲方公司名称：____

见证人姓名：____

地址：____

职务：____

签名：____

乙方签字人：____

乙方公司名称：____

见证人姓名：____

地址：____

职务：____

签名：____

缩水服务代理合作协议

合同号：

甲方名称：_________________________

乙方名称：_________________________

一、代理商的基本条件

1、是独立的法人实体，具有完全民事行为能力和合法的经营资格，或能够独立承担民事责任的个人；

2、提供公司营业执照复印件、公司简介给甲方，个人则需传真身份证复印件并愿意接受甲方的审核；

3、有兴趣致力于博彩行业，了解彩票的相关知识及有关规定；

4、乙方必须充分理解并接受《 人工缩水服务代理合作协议》的条款，向客户统一收取服务费，本经甲方授权代表书面盖章签字许可，乙方不能以任何形式给予客户折扣优惠，一发现，甲方立即取消乙方代理资格。

5、本着诚实负责的态度为广大彩民服务；

6、代理商有义务在其主要市场内尽力提高万通缩水服务的品牌知名度。在市场活动中不得有任何有损万通公司形象的行为；

7、乙方相关硬件要求，有一定独立面积的彩票投注站、电脑、传真机各一台。（视情况而定，以不影响缩水业务流程为准。）

二、乙方权利和义务

1、乙方确保自己及本地彩民（以下简称客户）的行为不违反中华人民共和国的政策、法律和法规，乙方违反此义务给甲方造成损失的，由乙方承担赔偿责任。

2、乙方向客户提供相关服务，自行负责开拓市场与发展客户，在代理业务中保证向客户提供良好的服务，不得以欺诈、胁迫等不正当手段损害客户及甲方的利益和声誉。

3、乙方承诺不以低于甲方给予其服务费发展客户，等其他有损甲方利益的活动。乙方违反此义务时，甲方有权自行决定降低乙方服务的分成比例或取消乙方的代理资格；同时，乙方违反此义务给甲方造成损失的，乙方应承担相应的赔偿责任。

4、乙方须详细阅读并确实理解甲方在本代理商制度协议的全部内容，并严格遵守代理商制度，以及在向甲方委托业务时，完全按照代理商制度中规定的操作，并按正确步骤进行。

5、乙方应按甲方制定的届时有效的价格标准所选择的服务付款，并及时为所代理的业务续费，甲方不负有提前通知的义务。乙方未按时付款造成的损失由乙方自行负责。

6、乙方应对甲方明确提示为保密材料的信息给予保密。

7、乙方有权利在本地区发展其下一级的代理商，如需甲方配合，甲方将酌情支持乙方工作。

8、乙方的处理方案结果以甲方服务器上的备份为准。

三、甲方权力和义务

1、甲方按照双方约定的服务条款（详见附件1、2、3），为乙方提供相应的技术支持。

2、甲方有权根据市场情况调整代理商制度，代理价格和服务条款，并将通过其他方式通知乙方变更后的代理商制度和代理价格信息。更新后的各种信息通知之时起生效，非特殊情况上述变更甲方均不另行通知甲方。

3、甲方应对乙方明确提示为保密资料的信息给予保密。

4、如乙方违反本协议或由于乙方行为对甲方造成利益、名誉等损失，甲方有权取消乙方代理资格。

5、甲方持续完善代理服务系统，以更方便和支持乙方开展代理业务。

6、甲方在于乙方没有中止合作协议以前，不得在乙方所在城市发展其它一级代理商。

四、市场宣传支持

1、整体市场宣传活动由甲方全权负责，费用由甲方负担。

共3页，当前第1页123

委托档案保管合同

甲方：_____________________

乙方：_____________________

身份证号：_________________

经甲、乙双方协商，就乙方委托甲方保管档案达成以下协议：

1.甲方根据《档案法》和_________部、人事部有关规定，为乙方保管档案。乙方应在签订本协议及缴交档案保管费后，按有关规定及时将档案及相关资料转入甲方，否则甲方不予提供相关服务。

2.经乙方申请，甲方按国家有关规定，只为乙方提供出具档案保管证明以及借阅档案的服务，不提供其他服务。此外，乙方的就业及与其他机构的关系、工资福利、社保医疗、人身权益及人身意外等均应自理。

3.乙方应遵守国家及省、市的法律法规，遵守甲方有关档案及人事管理规定和计划生育管理的有关规定。

4.本协议期自______年_____月_____日至______年_____月_____日。本协议期满，乙方应及时与甲方续签或将档案转出;否则，视为乙方继续委托甲方保管档案，甲方可依规定的收费标准每年向乙方计收档案保管费，并保留追收乙方欠费的权力。

5.乙方应于签订本协议时向甲方缴交档案保管费_________元，协议期内如档案调出，费用不予退还。

6.本协议由甲方代表人签字，加盖公章及乙方签章后生效。甲、乙双方各执一份，具同等效力。

7.本协议未尽事宜，由甲、乙双方协商解决。

甲方(公章)：_________    乙方(签字)：_________

负责人(签字)：_______    地址：_________________

_________年____月____日    _________年____月____日

广告服务合同（二）

甲方：________________________________

乙方：_____________网（运营商：______）

依据《中华人民共和国广告法》之有关规定。经甲、乙双方友好协商，甲方委托乙方设计、制作、发布网络广告，达成如下合同条款：

一、网络广告发布位置：乙方网站。

二、网络广告发布尺寸：_________像素×_________像素。

三、网络广告发布形式：□静态 □动态

四、网络广告发布时间：_________月或_________天，即从广告发布之日起。

五、甲、乙双方的权利和义务

甲方指派专人代表甲方全权负责此项网络广告发布工作；

甲方为乙方提供网络广告的相关背景资料和数据；

甲方对“初稿”提出审定意见；

甲方对本网络广告内容负责，内容必须符合《中华人民共和国广告法》及国家相关法律法规。否则，造成的后果由甲方负责；

乙方向甲方提交网络广告初稿1份及电子浏览文件1份；

乙方根据甲方的审定意见进行修改，并向甲方提供发布稿及电子浏览文件；

乙方取得甲方在发布稿上签字同意后在网上发布；

乙方有权审查甲方的广告内容和表现形式，对不符合法律、法规的广告内容和表现形式，乙方可要求甲方做出修改。

六、责任免除

因自然条件（战争、机房停电）等导致乙方服务器不能正常运行；

因政府行政行为导致乙方不能开放服务器；

因互联网灾难、中国、美国等互联网通讯提供商原因导致乙方服务器不能正常接入；

因乙方操作平台及应用软件原因导致乙方服务器临时性不能正常运行；

因乙方网站遭遇不法攻击导致服务器临时性不能正常运行。

基于以上原因，导致乙方网站不能正常运行，乙方不承担任何法律上和其它方式的责任。

七、费用结算

本次网络广告费_________元（大写_________元整）。

本合同生效之日起，甲方付清全部款项。

八、本合同一式两份，自甲、乙双方签字盖章之日起生效，合同附件及合同文本具有同等的法律效力。

九、本合同有效期限：自_______年_______月_______日至_______年_______月_______日止。

甲方（盖章）：_________

代表（签字）：_________

联系电话：_____________

_________年____月____日

乙方（盖章）：_________

代表（签字）：_________

联系电话：_____________

_________年____月____日

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

商标代理委托合同范文

商标代理是指代理人在代理权限范围内，以被代理人的名义从事民事法律行为，所产生的法律后果直接归属于被代理人。以下是第一范文网小编为大家精心整理的关于商标代理委托合同范文，欢迎参考阅读。

商标代理委托合同范文一

甲方(委托方)：

乙方(受托方)：商标注册公司

为保护甲方的企业形象与无形资产，甲方现委托乙方作为甲方的知识产权代理机构代

理商标申请事宜，为明确双方的权利义务，在平等自愿的基础上，双方经友好协商，达成如

下协议：

一、甲方委托乙方就 商标在第 类，

进行注册申请，并就商标有关事宜向甲方提供免费咨询及相关法律建议。

二、甲方配合乙方的工作，并按乙方要求提供相关申请材料：营业执照正副本复印件、个人

身份证复印件、商标图样、商标注册申请书、商标代理委托书(申请书、委托书的文本由我

司提供)，我司及时完成甲方委托的事务。

三、乙方根据甲方的委托需要，负责完成商标申请文件的撰写，经甲方确认后由乙方向国家

商标局提交商标申请文件，乙方在获得国家商标局正式受理通知后将受理通知书原件送交甲

方。

四、如后期商标局发文，经乙方通知甲方，甲方需在法定期限内给予乙方答复，如到期不答

复，乙方可视为甲方同意商标局的处理决定，按相关法律回复商标局。

五、甲方在签订本协议之日起两个工作日内将注册费 元(人民币)

以现金或者汇款方式汇至乙方指定银行帐号。

开户名：

开户行：

帐号：

六、在商标申请期间，甲方任何联系方式，包括地址、电话、传真等如有变化，请及时通知

乙方，以便联系。如因甲方联系方式变更未及时通知乙方所造成的法律后果，由甲方自行承

担。

七、在甲方商标注册申请核准后，乙方可以无偿为甲方提供该注册商标的《商标公告》监测

服务，并在发现有相同或近似商标后，及时通知甲方并提供相应的法律文书。

八、甲方在商标申请保护及打击商标假冒侵权行为过程中，需乙方提供相应协助的，乙方将 无偿提供相关的法律咨询及建议，以协助甲方维护自身权利。

九、甲方注册商标在有效期满前，乙方可及时通知甲方办理续展手续。

十、因执行本协议发生的争议，由双方先行协商;如协商未果，任何一方均可向人民法院提起诉讼。

十一、本协议于 年 月 日在 签订，经双方代表人或授权人签字、盖章后生效。本协议一式两份，甲方双方各执一份，具有同等效力。

甲方： 乙方：

代表人(签字)： 代表人(签字)：

地址： 地址：

电话： 电话：

传真： 传真：

商标代理委托合同范文二

委托人：___________________

被委托人：_________________

根据商标法实施条例第七条规定：

1.商标申请人_________，身份证号码_________ ，委托_________商标事务所代理□商品商标□服务商标的申请：

类别：___________________________

指定商品/服务：__________________

2.商标代理服务内容

□ 商标申请人委托商标代理机构进行商标设计

□ 商标申请人委托商标代理机构进行申请前在先权利的查询

□ 商标代理机构接受委托负责提供全部商标申请的法律文件;

□ 商标代理机构接受委托负责答复国家商标局审查员提出的审查意见和补正通知;

□ 商标代理机构接受委托负责代理委托人向国家商标局交纳商标申请的相关费用。

3.商标代理相关费用

□ 商标设计费______元 □ 商标查询费______元 □ 商标注册费______元

□ 商标代理费______元 □ 商标续展费______元

4.商标代理委托期限

自______年______月______日至国家商标局颁发商标注册证。

委托人可获得6个月在专利商标创业网站免费宣传商品或服务的优惠条件。

5.附商标图样：________________________

委托人(单位或个人)____________

(盖章或签字)

___________年_______月________日

被委托人(商标代理机构)________

(盖章或签字)

___________年_______月________日

商标代理委托合同范文三

甲方(委托人)：___________________

乙方(受托人)：___________________

甲方就 一案委托乙方代理商标事务，现经双方协议，订立下列条款，共同遵守：

一、甲方委托乙方办理的商标事务如下：

□ 商标注册申请 □ 商标异议申请□ 变更商标申请人/注册人名义/地址申请 □ 删减商品/服务项目申请 □ 变更商标代理人申请 □ 更正商标申请/注册事项申请 □ 转让申请/注册商标申请 □ 商标续展注册申请□ 撤销连续三年停止使用注册商标申请 □ 商标注销申请□ 注册人死亡/终止注销商标申请□ 补发变更/转让/续展证明申请 □ 补发商标注册证申请 □ 提供商标注册证明申请 □ 提供优先权证明文件申请 □ 商标使用许可合同备案申请□ 商标使用许可合同备案变更/提前终止申请□ 商标专用权质押登记申请 □ 撤回商标注册申请申请 □ 撤回商标异议申请 □ 商标评审事宜

□ 其他： 具体委托事项包括：___________________________

不包括：____________________

二、费用

三、双方权利、义务

1、乙方接受甲方的委托，指派商标代理人、担任甲方代理人;如指派的代理人因故中途不能执行任务，乙方应负责另行指派其他代理人接替，并及时通知甲方。

2、乙方依法对商标内容负有保密义务。

3、甲方可以取消与乙方的委托关系，需以书面的形式通知乙方，但所交费用不予退还，并赔偿由此给乙方造成的损失。

4、乙方对商标局的通知或决定需甲方办理的，应以书面或电话的方式通知甲方，通讯地址以本合同联系人地址为准。书面通知以挂号信函寄给甲方，甲方联系方式如有变更应及时以书面形式通知乙方，如因此而导致答复期限耽误的责任由甲方负责。

四、其他事项

1、本合同自双方签章之日起生效。若委托事项为商标申请注册，则乙方工作至该申请取得“商标注册证”，或该申请被商标局被驳回之日。

2、本合同一式两份，双方各执一份。

甲 方：___________________

乙 方：___

个人住房公积金委托贷款合同

公积金个人住房委托贷款是指建设银行受地方住房基金管理部门的委托，利用委托人提供的资金发放的个人住房贷款，贷款风险由委托人承担。

申请住房公积金贷款必须符合当地住房公积金管理部门有关住房公积金贷款的规定。应具备的基本条件为：

(1)有合法的身份;

(2)按时足额缴存住房公积金;

(3)有稳定的经济收入，信用良好，有偿还贷款本息的能力;

(4)有合法有效的购买、大修住房的合同、协议以及其他证明文件;

(5)有规定的最低额度以上的自筹资金，并保证用于支付所购(大修)住房的首付款;

(6)有符合要求的资产进行抵押或质押，或(和)有足够代偿能力的法人、其他经济组织或自然人作为保证人;

(7)符合当地住房公积金管理部门规定的其他借款条件。

个人住房公积金委托贷款合同范本

抵押权人：_______________ (以下简称甲方) 抵 押 人： _______________(以下简称乙方)

为保证甲方与 (以下称借款人)签订的 ____年 ___字第 ____号借款合同(以下称借款合同)的履行，乙方愿意以其有权处分的财产作为抵押，甲方同意接受乙方的财产抵押，并根据国家有关法律规定，签订本抵押合同，供甲乙双方共同遵守。

抵押担保的范围、年限

第一条 乙方以“抵押物清单”(附后)所列之财产设定抵押。并保证对该抵押物享有处分权。

第二条 乙方抵押担保的贷款金额人民币(大写)_______________ 元，贷款期限 ____年，从 ___年 ___月 ___日至 ___年 ___月 ___日，贷款用途为购、建住房。

第三条 本抵押物担保范围为借款合同项下之借款本金、利息、罚息、违约金及实现抵押权的费用。

抵押物的使用、保管及费用

第四条 乙方须保证该抵押物的合理使用，不得将抵押物用于保险条款禁止或排除的任何方式或目的。

第五条 未经甲方同意，乙方不得对该抵押物作出任何实质性结构改变。因乙方违反本合同所作的改变而使该抵押物产生的添附物，自动转为本贷款项下的抵押物。

第六条 抵押期间，未经甲方同意，乙方不得将该抵押物转让、出租、变卖、再行抵押、抵偿债务、馈赠或以任何形式处分。由此引起甲方的任何损失，均由乙方承担责任。

第七条 抵押期间，乙方有义务妥善保管抵押物，并负有维修、保养及保持其完好无损的责任，并随时接受甲方的监督检查。由于抵押物毁损所导致的抵押物价值减少，应及时通知甲方并于三十日内向甲方提供与减少的价值相当的担保，因抵押物造成环境污染或造成的其他损害，由乙方独立承担责任。

第八条 本合同项下的的评估保险、鉴定、登记、保管等费用及涉及该抵押物的一切税费均由乙方承担。乙方因不履行该项义务对甲方造成的损失，由乙方负责赔偿。

抵押物的保险

第九条 乙方签订本合同后，应到甲方指定的保险公司办理该抵押物的财产保险。保险的赔偿范围应为该抵押物遭受任何火灾、水灾地震等自然灾害及其他意外事故所导致的破坏及毁损;投保金额不得少于其借款合同项下的贷款金额;保险期限与借款合同期限应一致，如借款合同到期，借款人未履行到期还清全部贷款本息的义务，乙方应继续购买保险，直至借款合同项下贷款本息全部偿还完毕止。

第十条 乙方应指定甲方为保险单的第一受益人，并在保险手续办理完后将保险单正本交甲方保管。

第十一条 抵押期间，乙方不得以任何理由中断或撤销上述保险，否则，乙方须无条件赔偿甲方因此所受的一切损失。

第十二条 抵押期间，该抵押物如发生投保范围的损失，或者因第三人的行为导致抵押物价值减少，保险赔偿金或损害赔偿金应作为抵押财产，提前清偿贷款本息或交由第三方提存，抵押期间乙方不得使用。

第十三条 抵押期间，该抵押物发生保险责任以外的毁损，由乙方承担责任，并应就受损部分及时提供新的担保，办理相应手续。

抵押物的处分

第十四条 借款人不履行借款合同约定条款时，甲方有权以抵押物折价或拍卖、变卖抵押物所得价款优先受偿，实现抵押权。

第十五条 抵押期间，经甲方书面同意，乙方转让抵押物所得价款应向甲方提前清偿所担保的债权。

第十六条 发生下列情况之一时，甲方可提前将抵押物折价或拍卖、变卖所得价款优先受偿，实现抵押权：

(一)乙方违反本合同第四条、第五条、第六条、第七条、第十条、第十一条、第十二条、第十三条;

(二)借款合同履行期间借款人丧失民事行为能力、被宣告失踪、被宣告死亡或死亡而无继承人或受遗赠人、卷入重大经济诉讼纠纷或发生其他足以影响其偿债能力或缺乏偿债诚意的行为;

(三)乙方的继承人或受遗赠人或财产代管人拒绝为乙方履行偿还贷款本息;

第十七条 甲方依法处分抵押物所得价款，按下列顺序分配：

(一)支付处分抵押物所需费用;

(二)清偿借款人欠甲方贷款罚息和利息;

(三)清偿借款人欠甲方贷款本金、违约金和赔偿金等;

(四)支付其他费用。

第十八条 处分该抵押物的价款超过应偿还部分，甲方应退还乙方。

抵押人的承诺及声明

第十九条 乙方在自愿遵守本合同条款的同时，作如下声明及承诺：

(一)向甲方提供的一切资料均真实可靠，无任何伪造和隐瞒事实之处;

(二)准许甲方或其授权人，在任何合理的时间内依法进入该抵押房产，以便检查;

(三)在工作单位、联系方式等发生变化时，须在十日内书面通知甲方;

(四)在占有该抵押物期间，遵守有关管理规定，按时付清该抵押物的各项费用，并保证该抵押物免受扣押或涉及其他法律诉讼。如不履行上述责任，负责赔偿甲方因此遭受的损失。

(五)当有任何诉讼或仲裁发生，可能对该抵押物产生不利影响时，保证在十日内书面通知甲方。

违约责任

第二十条 乙方因隐瞒抵押物存在共有争议、被查封、被扣压或已设定抵押权等情况而给甲方造成经济损失的，应向甲方支付借款合同项下贷款金额5%的违约金，违约金不足以弥补甲方损失的，乙方还应就不足部分予以赔偿。甲方有权就违约金、赔偿金直接以乙方存款帐户中的资金予以划扣。如果任何一方违反本合同任何条款，给对方造成经济损失的，应向对方支付借款合同项下贷款金额5%的违约金，违约金不足以弥补对方损失的，违约方还应就不足部分予以赔偿。

争议的解决

第二十一条 如因履行本合同而产生任何纠纷，双方应友好协商解决;协商不成的，由甲、乙双方共同选择下列方式之一解决：

(一)______仲裁委员会裁决;

(二)向抵押房屋所在地人民法院起诉。

第二十二条 争议未获解决期间，除争议事项外，不影响合同其余部分的履行。

其他

第二十三条 本合同自甲、乙双方签字(盖章)之日起生效。抵押设定期限与贷款实际发放时间不一致的，抵押期限以贷款实际发放时间之日起顺延。

第二十四条 本合同所保证的借款合同履行完毕，本合同即告终止。甲方应将抵押凭证退还乙方，并有义务协助乙方到抵押登记机关办理抵押注销手续。

第二十五条 本合同一式 份，均具同等法律效力，由 方各执一份，武汉市房改委资金管理中心、抵押登记机关各留存一份。

甲方(公章)_______________ 乙方(签章)_______________

法定代表人(签字)_______________

___年 ___月 ___日 ___年 ___月 ___日

中外劳动技术服务合同范本

甲方： ×国××公司 法定地址： ×××(电话，电报挂号，电传)

乙方： 中国××公司 法定地址： ×××(电话，电报挂号，电传)

第一条 根据甲方的愿望，乙方同意派遣中国工程师，技术工人，行政人员(翻译，厨师)在××国工作。具体人数，工种，工龄和月工资详见本合同附件(略)。该附件为本合同不可分割的组成部分。

第二条 乙方人员出入中国国境和过境手续，由乙方负责办理，并负担其费用。乙方人员出入××国国境的签证和在××国境内所需办理的居留，劳动许可证等手续由甲方负责办理并负担其费用。

第三条

1.乙方人员在×国工作期间，由甲方按本合同的规定向乙方人员支付每月的工资。

2.凡工作不满一个月的乙方人员，按下列公式计算：

不满一个月的工资=月工资/30天×工作天数(包括周日和官方假日)

3.上述工资应以乙方人员到达×国之日起到离开×国之日止计算。

4.乙方于每月末将乙方人员该月的工资，包括加班费，列具清单提交甲方，甲方于清单开出之日起三天内按清单所列金额的75%以美元支付，并按当天牌价电汇给北京中国银行总行营业部中国××公司××帐户，并按×国×银行的规定负担其手续费。同时书面通知中国驻×国大使馆经济参赞处。

5.甲方将乙人员月工资和加班费的25%以××国××货币支付并汇给中国驻×国大使馆经济参赞处在××银行××帐户。

第四条 甲方负责乙方人员从××到××的旅费，并负责将此费用汇到上述乙方帐户。乙方人员从××返回××，由甲方通过××航空公司向乙方人员提供机票。甲方负责乙方人员只限往或返单程的行李超重费，其重量为20公斤。

第五条

1.甲方负责乙方人员的住宿费。在工作时间和加班时间提供从居住地到工地的交通工具。负责国营医院的医疗费。

2.乙方人员的工资和加班费不交所得税。

3.甲方为乙方人员在××国家保险公司投保生命保险。其保险费每人为(货币及数量)

4.甲方向乙方人员提供工作服和工作需要的工具。

5.甲方提供的住房，包括水，电，空调和必要的家具，床和床上用品。

6.乙方人员的居住面积如下：

(1)组长，工程师，技术员，行政人员为8--10平方米;

(2)其余人员为4--5平方米。

7.甲方向乙方提供厨房所用的饮具和旨在自己用饭所需的餐具。

第六条

1.乙方工作人员每周工作六天，每天工作八小时。

2.根据工作需要，甲方需要乙方人员加班时，加班工资按下列比例计算：

平时加班为日工资的150%。

周假日加班为日工资的200%。

第七条

1.乙方人员享受周日假和××国官方规定的节假日为十七天。

2.乙方人员每年享受带薪休假三十天。如乙方不愿享受上述假期或享受部分天数，甲方应向乙方提供报酬，其工资按下列方法计算：月工资/30天×假期工作天数。

共3页，当前第1页123

甲方：_________

乙方：________ 地址：__________

地址：_________ 甲乙双方本着友好协商、共同发展的原则签订本翻译服务合同，其条款如下：

一、甲方委托乙方为其提供翻译服务，及时向乙方提交清晰、易于辨认的待译资料，提出明确要求，并对乙方的翻译质量进行监督。

二、乙方按时完成翻译任务（如发生不可抗力的因素除外），向甲方提供已翻译好的打印件及电子文件各一份。具体交稿日期由双方商定。对于加急稿件，交稿期限由双方临时商议。

三、乙方对甲方提供的任何资料必须严格保密，不得透露给第三方。

四、翻译工作量统计：电子译稿：按电脑统计的中文版字符数计算（中文版d中“不计空格的字符数”）；打印译稿：按中文原稿行数215;列数统计计算（行215;列）。

五、乙方按优惠价格向甲方收取翻译费用：英为_________元千字符（_________字以上）。

六、乙方可以在翻译开始前为甲方预估翻译费，甲方付款时则按实际发生的工作量支付给乙方翻译费用（工作量统计方法见本合同第四条）。

七、乙方承诺，交稿后，对翻译稿进行必要修改，不另行收取费用。

八、付款方式：甲方在收到乙方译稿的当日按实际费用先支付乙方翻译总费用的50％，余款应在交稿后的____日内付清，如第____日余款还未付清，则甲方每延误一天需要向乙方交纳翻译总费用_________‰的滞纳金。

九、乙方应当保证译文的翻译质量和翻译服务达到行业公允的水平，如对译文的翻译水平发生争议，应由双方共同认可的第三方评判，或者直接申请仲裁。

十、本合同一式两份，双方各执一份，经甲乙双方签章后生效。

甲方（盖章）：_________

乙方（盖章）：_________ 代表（签字）：_________

代表（签字）：_________ 签订地点：_____________

签订地点：_____________ ________年____月____日

________年____月____日

国际技术服务合同（1）

在 注册成立的 公司（以下简称甲方）和中国 公司（以下简称）、于 年 月 日签订本技术服务合同：

第一条

1. 应甲方邀请，乙方同意派遣 名工程师组成的中国技术服务组。于 年 月 日赴 （甲方国名）的 （市）（或某工地）；

2. 在 （甲方国名），受甲方邀请的乙方中国技术服务人员应有准备，并且愿意同 甲方的 公司共同工作。

第二条

乙方人员在 （甲方国名）期间，应服从甲方国家的法律，受甲方的管理规章制度约束。

第三条

1.（1）甲方负责向乙方人员支付乙方提出的每个每月 （币别）的免税技术服务费。

（2）上述免税技术服务费的＿＿＿%应以美元（或英镑）支付。

（3）本条（1）款提及的技术服务费自乙方人员到达 （甲方国名）之日起开始计算。

2.（1）在甲方服务期间，乙主人员在工作或业余的全部时间内，应保证行为端正。

（2）甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。

第四条

甲方负担乙方人员往返中国和 （甲方国名）的国际旅费和第人不超过20公斤的超重行李费，并负责安排机票。

第五条

1. 第三条1（1）款中所提的技术服务费的 %应以 币（即甲方的国币）支付给在 的中国技术服务组，其余 %应由甲方按银行当日公布的况率折成美元（或英镑）。

2. 所折成的美元（或英镑）应电汇 （如伦敦）中国银行转汇北京（或其它中国城市）中国银行营业部 公司（即乙方公司） 号帐户。

3. 甲方应以书面形式将汇款情况通知中国驻甲方国大使馆经参处。

第六条

甲、忆双方执行合同期间，甲方同意：

1. 为乙方技术服务组人员提供设备齐全的住宿；

2. 为乙方技术服务组人员提供交通工具；

3. 提供乙方必要的充分的劳保用品；

4. 为乙方技术人员提供人寿保险；

5. 为乙技术服务人员提供足够的办公设施和用品；

6. 在指定的医院或诊所为技术服务组人员提供医疗，但不包括镶牙、配镜和性病的治疗。

7. 乙方技术服务组人员因公出差，应按照甲方人员待遇，发给出差补助费，以 币（甲方国币）支付给乙方技术服务。

第七条

合同期间，乙方技术人员享受中 （甲方国名）两国的全部公共假日。

第八条

1. 乙方人员第年享受三十天的休假，工资照发（从开始工作之日起算起工作十一个月，第十二个月为休假）。休假期间工资应全部以美无（或英镑）支付。

2. 乙方技术人员每年应得 元（甲方国币）的奖金，奖金的 %以美元（或英镑）支付。

3. 在甲方服务期间，甲方为乙方技术人员回国休假提供往返经济舱机票。

第十条

在合同期间内，乙技术人员由于家庭不幸和/或其它原因，可请紧急事假十天。

1. 准予乙方人员事假时，甲方不负责：

（1） 乙方事假人员旅费；

（2） 本合同第三条1（1）款中所规定的技术服务费；

（3） 因乙方人员事假期满后不能返回 （甲方国名）而换人时所需费用。

3.（1）在合同期间内，由于甲方或所在国原因，致使乙方人员不能工作时，甲方同意：向乙技术人员支付双方同意的技术服务费（见第三条1（1）款）；

（2）因甲方原因终止合同、甲方违反合同或阻挠合同履行时，甲方同意：

a、 按合同规定费用，向乙方人员支付三个月的技术服务费（见第三条1（1）款）：

b、 执行本合同第四条的规定。

第十一条

1. 乙方技术人员因身体不好或工伤，在两个月内不能痊俞时，乙方同意：

（1） 从中国另行派人替换上述人员；

（2） 承担替换人员从中国到 （甲方国名）的旅费。

（3） 甲方同意承担因病或工伤返回中国人员因工伤致残或死亡，甲方同意：

2、在合同期间内，技术服务组人员工伤致残或死亡，甲方同意：

（1） 处理事故，工伤或死亡的一切善后事宜；

（2） 负担所产生的费用；

（3） 按 （甲方国名）现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。

第十二条

本合同未尺事宜，由双方通过友好协商解决。

双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产后或与本合同有关的其它事项，应根据 （甲方国名）的现行法律，提交双方均能接受的唯一仲裁解决。

第十三条

本合同的执行从 年 月 日开始，有效期限共 年，此为经一阶段 年合同期满后，双方应进一步商定延续合同期限和与之有关的条件。

第十四条

本合同共两份，分别用中、 文写成，双方各执一份。两种文本具有同等效力，并对双方均有约束力。

甲乙双方于上述日期签字盖章为证。

甲方签字人：

甲方公司名称：

见证人姓名：

地址：

职务：

签名：

乙方签字人：

乙方公司名称：

见证人姓名：

地址：

职务：

签名：

本模板由京师律师学院提供，更多资讯请关注微信公众号、新浪微博"京师律师学院"

甲方： 公司

法定地址：

乙方：

国籍：

住址：

护照/身份证号码：

鉴于乙方是下列中的第 类人员，甲方拟聘用乙方为甲方提供专项劳务服务，乙方愿意为甲方提供专项劳务服务，本着诚实信用的原则，经过充分友好协商，双方于____年____月____日在中华人民共和国北京市达成以下合同条款以资信守：

A、已办理退休手续;

B、已办理内退手续;

C、已办理协议离岗手续，并且协议尚未到期;

D、有学籍的在校学生;

E、与第三人已经签署合法的劳动合同，建立劳动关系。

第一条 定义和释义

以下名词除本合同条款另有解释和约定外具有以下定义和释义：

1.1 本合同：是指甲方和乙方于上述时间和地点达成的本《劳务服务合同》;

1.2 专项劳务服务：是指本合同第二条约定的专项劳务服务;

1.3 第三人：本合同签约双方之外的任何自然人、企事业单位、政府机关及组织。

第二条 服务内容、质量标准及提供服务的时间、地点和方式

乙方向甲方提供专项劳务服务的内容为:___________ 乙方向甲方提供服务的详细内容、质量标准以及提供服务的时间、地点和方式详见本合同附件一。

第三条 乙方的资质

3.1 乙方应受过良好的教育或专业培训具有提供甲方所需劳务的资质。

第四条 劳务报酬及其支付方式

4.1 甲方按照第 种方式支付乙方的劳务报酬：

1、乙方的劳务报酬按每小时 元人民币计收，甲方于每月 号前以现金形式向乙方依法支付上一个月的累积报酬。或者;

2、乙方的劳务报酬按批次计收，甲方于乙方完成该次劳务后的 日内以现金形式依法支付。

4.2 乙方劳务报酬的个人所得税的缴纳，按照国家规定执行。

4.3乙方提供专项劳务有瑕疵给甲方造成损失的甲方有权利直接在给乙方的报酬中抵扣。

第五条 合同期限

5.1 本合同的期限自 年 月 日起至 年 月 日止。

第六条 乙方义务

乙方保证依据本合同及附件如期向甲方提供劳务并交付成果。 因乙方提供劳务导致甲方面临第三人权利追索、被提起仲裁或诉讼及产生任何纠纷的乙方有义务积极配合甲方处理上述事宜

第七条 甲方义务

7.2 甲方不得强令乙方从事违反法律法规的活动。 甲方应为乙方提供劳务配备必要的配套设施、设备及环境，并保证该设备、设施、环境的安全。

7.3 甲方应依法按时足额向乙方支付报酬。

7.4 甲方负责为乙方办理人身意外伤害保险。

第八条 乙方的声明和保证

8.1 乙方没有任何传染性疾病且身体健康适宜提供本合同约定的劳务。

8.2 乙方没有违反刑事法律的记录 乙方已经知悉本合同及其附件的全部内容。

8.3 乙方提供的劳务没有侵犯他人法律权利且没有使用权属有争议的财产、技术、权利。

第九条 甲方的声明和保证

9.1 甲方是依法成立的法人单位具有以自己的名义对外签订劳务协议的权限。

9.2 甲方所需劳务不具有任何非法目的。

第十条 非合伙、雇佣关系

10.1 乙方不因本合同的签订而成为甲方的合伙人。

10.2 乙方不因本合同的签订而成为甲方员工。

10.3 乙方的人事档案由乙方或与乙方具有合法劳动关系的第三人保管，乙方的各项社会保险费用、住房公积金等由乙方或与乙方具有合法劳动关系的第

三人缴纳。乙方不具有且不能宣称具有甲方员工的身份。

第十一条 保密

11.1 甲乙双方都有互相保守所知悉的对方商业秘密的义务。

11.2 泄露对方商业秘密的，受害方有权利要求泄密方赔偿损失。

第十二条 合同的变更和解除

12.1 合同到期日前经协商一致可提前变更、解除合同。

12.2 乙方提供的劳务不能达到甲方要求的甲方有权不经预告而随时单方解除合同。

12.3 如乙方面临刑事或治安的追诉、制裁及有其他严重违反社会公德的行为的甲方可不经预告而随时单方解除合同。

12.4 乙方不能或预计不能提供劳务连续达 日的甲方有权解除和乙方签订的劳务合同。

12.5 乙方罹患疾病继续提供劳务将严重危及其自身健康或甲方员工身心健康的双方均有权单方解除合同。

12.6 甲方提供的配套设施、设备、环境存在严重安全隐患经乙方提出意见后拒不消除的乙方有权单方解除合同。

第十三条 合同的续签

13.1 本合同到期日前 日内，双方可协商续签劳务合同。

13.2 合同到期后双方未能续签劳务合同的原劳务合同自然终止。

第十四条 责任的承担及免除

14.1 甲方无故迟延支付乙方报酬的按迟延支付总额的日万分之三向乙方支付违约金。

14.2 合同签订后乙方未能向甲方提供约定的劳务的乙方应向甲方支付 元人民币的违约金。

14.3 因甲方提供的配套设施、设备及环境存在安全隐患给乙方造成损害的甲方应承担赔偿责任。

14.4 乙方提供的劳务不符合法律法规的规定及甲方的要求给甲方及第三人造成损失的乙方应承担赔偿责任。

14.5 因一方的过错导致对方向第三人承担赔偿等法律责任的责任承担方有权向过错方进行追偿。

14.6 任何一方均无需向对方承担在劳务的提供过程中非因自己的过错产生的事故、损害的补偿、赔偿责任。

14.7 由乙方自行承担劳务提供过程中发生的无过错责任。

14.8 乙方向甲方提供虚假或不完整信息或证明导致签署本合同的，本合同无效，并由乙方承担因此产生的赔偿责任。

第十五条 争端的解决

15.1 因本合同产生的争议双方选择北京仲裁委员会仲裁解决。

15.2 仲裁适用中华人民共和国法律法规及北京仲裁委员会受理仲裁申请时的仲裁规则。

15.3 仲裁为终局仲裁，一经生效对双方均产生约束力。

第十六条 附则

16.1 本合同自双签章之日起生效。本合同一式 份，双方各持 份。

16.2 本合同的附件与本合同为不可分割的整体，具有同等法律效力。

技术服务合同书

技术服务合同是指当事人一方以技术知识为另一方解决特定技术问题所订立的合同。以下是小编为您带来的技术服务合同书，欢迎阅读参考哦!

合同编号：_________

委托方：_________

法定住址：_________

法定代表人：_________

职务：_________

委托代理人：_________

身份证号码：_________

通讯地址：_________

邮政编码：_________

联系人：_________

电话：_________

传真：_________

帐号：_________

电子信箱：_________

服务方：_________

法定住址：_________

法定代表人：_________

职务：_________

委托代理人：_________

身份证号码：_________

通讯地址：_________

邮政编码：_________

联系人：_________

电话：_________

传真：_________

帐号：_________

电子信箱：_________

鉴于：本合同签约各方就本合同书中所述技术秘密的技术内容、成果权益、收益分配、费用支付、违约责任以及与之相关的技术及其资料等内容经过平等协商，在真实、充分地表达各自意愿的基础上，合同双方就_________项目的技术服务(该项目属_________计划)，根据《中华人民共和国合同法》之规定，达成如下协议，由签约各方共同恪守。

第一条 合同性质

本合同属于：

技术咨询合同

技术培训合同

技术中介合同

第二条 服务项目名称

项目名称：_________

第三条 技术服务合同的内容、方式、和要求

技术指标和参数(或考核指标)：_________

技术服务质量、期限保证：_________

技术服务方式：_________

第四条 合同履行期限、地点和方式

1.合同履行期限：本合同分以下_________个阶段履行

第一阶段：从_________年_________月_________日到_________年_________月_________日止;

第二阶段：从_________年_________月_________日到_________年_________月_________日止;

第三阶段：从_________年_________月_________日到_________年_________月_________日止;

2.合同履行地点：本合同约定在_________方所在地履行。

合同应约定履行地点，合同没有约定的，推定在接受服务方所在地履行。

3.合同履行方式：_________。

第五条 工作条件和协作事项

委托方为服务方提供如下条件：

提供资料、数据、样品、材料等包括：_________

提供场地、设施和试验条件等包括：_________

提供上述条件时间：_________

第六条 验收标准和方法

1.技术服务或者技术培训按_________标准，采用_________方式验收，由_________方出具服务或者培训项目验收证明。本合同服务项目的保证期为_________。在保证期内发现服务质量缺陷的，服务方应当负责返工或者采取补救措施。但因委托方使用，保管不当引起的问题除外。

2.验收标准：_________

3.验收方式：鉴定会、专家评估，或由接受服务方单方认可即视为验收通过。

第七条 报酬和支付方式

1.报酬：本项目报酬为(服务费或培训费)：_________元。服务方完成专业技术工作，解决技术问题需要的经费，由_________方负担。

2.支付方式采用以下第_________种方式：

(1)一次总付：_________元，时间：_________年_________月_________日

(2)分期支付：_________元，时间：_________年_________月_________日

(3)按利润_________%提成， 期限：_________年_________月_________日至_________年_________月_________日

(4)按销售额_________%提成，期限：_________年_________月_________日至_________年_________月_________日

第八条 违约金或赔偿损失额的计算

1.违反本合同第_________条约定，_________方应承担违约责任，承担方式和违约金额如下：_________

2.违反本合同第_________条约定，_________方应承担违约责任，承担方式和违约金额如下：_________

第九条 服务方权利义务

(一)服务方权利

1.服务方有接受委托方提供的技术资料、数据、样品、材料及工作条件的权利;

2.服务方交付工作成果后，有接受委托方支付报酬的权利;

3.委托方逾期不领取工作成果的，服务方有处分其成果的权利，扣回委托方应当支付的报酬和请求赔偿损失的权利;

4.委托方逾期不提供物质技术条件的，服务方有权解除合同。

(二)服务方义务

1.按照合同约定的服务项目解决技术问题，保证工作质量;

2.传授解决技术问题的知识;

3.服务方发现委托方提供的技术资料、数据、样品、材料或者工作条件不符合合同的约定的，及时通知委托方;

4.服务方在履行合同期间，发现继续工作对材料、样品或者设备有损坏危险时，应及时通知委托方;

5.服务方完成的工作成果需要保密的，应根据合同种约定的保姆范围和期限履行保密义务;

6.技术服务合同标的在保证期间内发现服务质量有缺陷的，服务方应负责返工或采取补救措施。

第十条 委托方权利义务

(一)委托方权利

1.有权要求服务方完成指定的工作项目;

2.有权要求服务方传授解决技术问题的知识;

3.有权利用服务方所完成的技术成果;

4.在服务方根本违约时，有权解除合同，要求服务方赔偿损失或者支付违约金。

(二)委托方义务

1.按照约定接受服务方的工作成果，并支付报酬;

2.按照合同约定未服务方提供工作条件，完成配合事项;

3.委托方所提供的技术资料、数据、样品、材料或者工作条件不符合合同约定的，应当在双方约定的期限内补充、修改或更换;

4.在服务方发现继续工作对材料、样品或者设备等有损害危险并通知委托方后，委托方应当在约定的期限内作出答复;

5.委托方应当在合同约定的期限范围内履行保守秘密的义务。

第十一条 委托方违约责任

1.违反合同约定，影响工作进度和质量，不接受或者逾期接受服务方的工作成果，支付的报酬不得追回，未支付的报酬应当支付。

2.未按合同约定提供有关技术资料、技术数据、相关文件、工作条件、影响工作质量、进度，应当支付数额为报酬总额_________%的违约金。

3.未按合同约定按期接受服务方的工作成果逾期两个月，应承担支付服务方数额为报酬总额_________%的违约金或赔偿损失的责任。

4.未按合同约定的时间、方式、地点支付服务方报酬逾期达两个月，应承担归还工作成果、支付报酬、赔偿损失的责任。

5.未按合同约定接受工作成果逾期达六个月，应支付服务方数额为报酬总额_________%的违约金、赔偿金、保管费。

6.违反合同约定的保密义务应当支付数额为报酬总额_________%的违约金或者赔偿损失的责任。

7.违约方承担违约责任后，签约方约定本合同内容：

(1)继续履行

(2)不再履行

(3)是否履行再行协商

第十二条 服务方违约责任

1.未按照合同约定，按期、保质完成工作成果，应承担免收报酬、支付违约金或者赔偿损失。

2.未按照合同约定的期限交付工作成果，退还委托方提供的技术资料、技术数据、文件，返还已支付的报酬，应当支付数额为报酬总额_________%的违约金，并赔偿委托方因此而产生的损失。

3.因服务方自身的原因丢失或者损坏、污染委托方提供的技术资料、技术数据、文件和其他物品的，应承担由此而给委托方造成的损失或按合同约定应当支付数额为报酬总额_________%的违约金。

4.对工作成果在保证期出现的问题，承担补救责任或赔偿责任。

5.不履行保密义务，应承担由此而造成的损失或支付数额为报酬总额_________%的违约金。

6.违约方承担违约责任后，签约方约定本合同内容：

(1)继续履行

(2)不再履行

(3)是否履行再行协商

第十三条 技术成果收益归属

在履行本合同中，委托方利用服务方提供的技术资料和工作条件完成的新的技术成果，属于委托方所有;服务方利用委托方提供的技术资料和工作条件完成的新的技术成果，属于服务方所有。

第十四条 声明及保证

委托方：

1.委托方有权签署并有能力履行本合同。

2.委托方签署和履行本合同所需的一切手续(_________)均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对委托方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.委托方为签署本合同所需的内部授权程序均已完成，本合同的签署人是委托方法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

服务方：

1.服务方有权签署并有能力履行本合同。

2.服务方签署和履行本合同所需的一切手续(_________)均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对服务方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.服务方为签署本合同所需的内部授权程序均已完成，本合同的签署人是服务方法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

第十五条 保密

双方保证对在讨论、签订、执行本协议过程中所获悉的属于对方的且无法自公开渠道获得的文件及资料(包括商业秘密、公司计划、运营活动、财务信息、技术信息、经营信息及其他商业秘密)予以保密。未经该资料和文件的原提供方同意，另一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。保密期限为_________年。

第十六条 通知

1.根据本合同需要一方向另一方发出的全部通知以及双方的文件往来及与本合同有关的通知和要求等，必须用书面形式，可采用_________(书信、传真、电报、当面送交等)方式传递。以上方式无法送达的，方可采取公告送达的方式。

2.各方通讯地址如下：_________。

3.一方变更通知或通讯地址，应自变更之日起_________日内，以书面形式通知对方;否则，由未通知方承担由此而引起的相关责任。

第十七条 合同的变更

本合同履行期间，发生特殊情况时，任何一方需变更本合同的，要求变更一方应及时书面通知对方，征得对方同意后，双方在规定的时限内(书面通知发出_________天内)签订书面变更协议，该协议将成为合同不可分割的部分。未经双方签署书面文件，任何一方无权变更本合同，否则，由此造成对方的经济损失，由责任方承担。

第十八条 合同的转让

除合同中另有规定外或经双方协商同意外，本合同所规定双方的任何权利和义务，任何一方在未经征得另一方书面同意之前，不得转让给第三者。任何转让，未经另一方书面明确同意，均属无效。

第十九条 争议的处理

1.本合同受中华人民共和国法律管辖并按其进行解释。

2.本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解;协商或调解不成的，按下列第_________种方式解决：

(1)提交_________仲裁委员会仲裁;

(2)依法向人民法院起诉。

第二十条 不可抗力

1.如果本合同任何一方因受不可抗力事件影响而未能履行其在本合同下的全部或部分义务，该义务的履行在不可抗力事件妨碍其履行期间应予中止。

2.声称受到不可抗力事件影响的一方应尽可能在最短的时间内通过书面形式将不可抗力事件的发生通知另一方，并在该不可抗力事件发生后_________日内向另一方提供关于此种不可抗力事件及其持续时间的适当证据及合同不能履行或者需要延期履行的书面资料。声称不可抗力事件导致其对本合同的履行在客观上成为不可能或不实际的一方，有责任尽一切合理的努力消除或减轻此等不可抗力事件的影响。

3.不可抗力事件发生时，双方应立即通过友好协商决定如何执行本合同。不可抗力事件或其影响终止或消除后，双方须立即恢复履行各自在本合同项下的各项义务。如不可抗力及其影响无法终止或消除而致使合同任何一方丧失继续履行合同的能力，则双方可协商解除合同或暂时延迟合同的履行，且遭遇不可抗力一方无须为此承担责任。当事人迟延履行后发生不可抗力的，不能免除责任。

4.本合同所称“不可抗力”是指受影响一方不能合理控制的，无法预料或即使可预料到也不可避免且无法克服，并于本合同签订日之后出现的，使该方对本合同全部或部分的履行在客观上成为不可能或不实际的任何事件。此等事件包括但不限于自然灾害如水灾、火灾、旱灾、台风、地震，以及社会事件如战争(不论曾否宣战)、动乱、罢工，政府行为或法律规定等。

第二十一条 合同的解释

本合同未尽事宜或条款内容不明确，合同双方当事人可以根据本合同的原则、合同的目的、交易习惯及关联条款的内容，按照通常理解对本合同作出合理解释。该解释具有约束力，除非解释与法律或本合同相抵触。

第二十二条 合同的效力

本合同自双方或双方法定代表人或其授权代表人签字并加盖单位公章或合同专用章之日起生效。

有效期为_________年，自_________年_________月_________日至_________年_________月_________日。

本合同正本一式_________份，双方各执_________份，具有同等法律效力。

委托方(盖章)：_________ 服务方(盖章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

委托代理人(签字)：_________ 委托代理人(签字)：_________

签订地点：_________ 签订地点：_________

_________年____月____日 _________年____月____日

防雷技术服务合同

甲方：______县气象局

乙方：______________

为了更好地保证建筑物防雷工程部分符合技术规范，杜绝因防雷设施不合格而返工的现象，根据《重庆市雷电灾害防御管理办法》的规定，经甲、乙双方协商，约定如下：

一、甲方负责对乙方________项目进行防雷工程部分施工图设计审核和现场施工监审。

二、施工图设计审核需乙方提供施工图纸一套(施工图应有防雷设计平面图及相应说明)，并填写申请表。甲方在乙方资料完备的情况下，一个工作日内完成审核、提出审查意见，符合要求的发给审核证书。

三、现场施工监审应分别在安装接地体和焊接引下线、安装接闪器时由乙方电话联系乙方到施工工地进行实地指导和分段测试，并填入相应报告表。此表是防雷工程验收的重要依据。预计施工监审时间为：________ 。

四、根据重庆市物价局文件(渝价[20xx]402号)规定，乙方应缴纳：

1.图纸设计审核费________元。(工程预算的________‰)

2.施工监审费________元。(每次________元)

两项费用总计________?元(大写________万________仟________佰________ 拾________元)。

五、甲方有责任对乙方提出的要求及时进行办理;乙方有义务提供准确的资料，及时联系甲方，对甲方提出的问题及时整改。

六、以上条款，甲、乙双方如有违反，将按照《中华人民共和国气象法》、《重庆市防御雷电灾害管理办法》的有关规定，给予处罚。

甲方(签章)：_____________

乙方：_____________________

_______年_______月_______日

技术专家合作协议书

(以下简称甲方)聘用 先生/女士(以下简称乙方)作为甲方技术专家。

本协议有效期为 叁 年，自双方签字之日起执行。

一、甲方承诺：

1、根据审核需要邀请技术专家开展审核专业咨询、专业技术研讨、授课等活动，并按公司有关规定发给补助/报酬。

2、向乙方提供或传达上级部门和甲方有关认证活动的信息

3、甲方邀请乙方参加审核或相关组织活动时，按每个审核日发放10元保险费用,由乙方自行办理保险。

凡在参加甲方的审核时，发生意外伤亡及其他一切事故，按乙方投保的保险条款执行，甲方不承担任何责任;若乙方未办理保险，则一切责任由乙方个人承担，甲方不承担任何责任。

二、乙方承诺：

1、遵守甲方相关管理程序的规定。

2、甲方安排审核活动时一般能保证参加，如无特殊情况累计二次不能按任务书执行审核任务，则视为不愿意参加甲方审核活动，不再安排审核任务。

3、本人同意在审核中发生意外时，按协议第一项中的第3条执行。

4、甲方的经营、管理及审核信息和客户情况均属甲方机密，未经甲方书面许可，不得向第三方泄露。

北京军友诚信质量技术专家(签字)：

认证有限公司(盖章)：

 年 月 日年 月 日

甲方(委托 人)：四川__________公司大唐丘北__________马路风电场道路工程项目部

乙方(检测机构)：____________县建设工程质量检测中心

检测机构编号：

根据《中华人民共和国民法典》、《建筑工程资料管理规程》、《________省建设工程质量检测管理规定》等法律法规的规定，遵循平等、自愿、公平和诚实守信的原则，甲乙双方就本建设工程检测事宜协商一致，签订本合同。

第一条：工程概况

1.1工程名称：大唐丘北__________马路风电场道路工程

1.2工程地点：__________县舍得乡

1.3结构类型：级配碎石基层、泥结碎石路面

1.4监督单位：__________水利水电建设工程咨询中南公司云南丘北赶马路风电工程监理部

1.5开工日期：____________

1.6其它：

第二条：检测项目

甲方委托乙方的检测项目：

其它：

第九条 争议的解决方式

双方发生争议的，可协商解决，或向有关部门申请调解;也可向

当地法院进行起诉。

第十条 附则

本合同自双方签字或者盖章之日起生效。本合同一式二份，甲方执一份，已方执一份。

甲 方：______________________(盖章) 乙 方：____________________(盖章)

法定代表人：____________________ 法定代表人：__________________________

合同订立时间：________年____月____日

合同订立地点：___________________

非专利技术转让合同

转让方:________法定代表人或负责人:________________

受让方:__________法定代表人或负责人:________________

根据《中华人民共和国合同法》的有关规定,经双方当事人协商一致,签订本合同｡

1.项目名称:________________｡

2.本非专利技术的性能,工业化开发程度:______________｡

3.本合同的授权性质:________｡(注:非专利技术转让合同当事人可以依照专利实施许可合同,采取独占,排他,普通许可证的形式｡)

4.使用本非专利技术的范围:____________(注:使用范围指地域范围､期限范围､使用方式范围｡)

5.转让方的主要义务:

(1)在合同生效之日起______天内,向受让方交付下列技术资料:______｡

(2)在合同履行过程中,向受让方提供下列内容的技术指导和服务:____｡

(3)保证所转让的技术具有实用性,可靠性,即为能够应用于生产实践的成熟技术｡保证使用本非专利技术能够达到下列技术经济指标:__________｡

6.受让的义务:

(1)向转让方支付使用费,数额为________元｡按下列日期分期支付:________(注:在采取提成支付的情况下,当事人可以约定:a.合同生效后______日内先向转让方支付________元;b.自合同产品投产之日起(或第一件合同产品销售之日起)________年内接产值(或销售额､或利润)的__________%向转让方支付提成费｡提成费每年支付一次,支付日期为每年________月______日前｡)

(2)按照合同约定的范围使用本非专利技术｡

7.保密条款在本合同有效期内,双方当事人应对下列技术资料承担保密义务:__________｡本合同期满后________年后,双方当事人应对下列技术资料承担保密义务:________｡

8.合同产品的验收标准和方法:________________｡

9.后续改进条款在本合同履行过程中,双方当事人各自在本转让技术基础上做出的新的发明创造专利权归做出发明创造的一方所有,但当事人另有约定的除外｡

10.转让方的违约责任

(1)转让方不按照合同约定向受让方提供技术资料及技术指导,应视不同情况,返还部分或全部使用费,并支付数额为________的违约金;

(2)转让方逾期两个月不向受让方提供技术资料及技术指导,受让方有权解除合同,转让方应当返还使用费,并支付数额为________的违约金;

(3)转让方违反合同约定的保密义务,泄露技术秘密,使受让方遭受损失的,转让方应当支付数额为________的违约金｡让与方实施使用该非专利技术超越约定的范围的,违反约定擅自许可第三人实施该项非专利技术的,应当停止违约行为,支付违约金或赔偿损失｡

11.受让方的违约责任(

1)受让方未按合同约定的期限和方式支付使用费,应补交使用费外,应向转让方支付数额为________的违约金,受让方拒不交付使用费或违约金,除必须停止使用非专利技术外应当返还技术资料,支付数额为__________的违约金;

(2)受让方逾期两个月不支付使用费,转让方有权解除合同,受让方应当停止实施被转让的技术,返还技术资料,支付数额为________的违约金;

(3)受让方使用本技术超越合同约定的范围的,应当停止违约行为,支付数额为______的违约金;

(4)受让方未经转让方同意,擅自许可第三方使用本非专利技术,应当停止违约行为,返还非法所得,并支付主数额为____________的违约金;

(5)受让方违反合同约定的秘密义务,泄露技术秘密,应当返还非法所得,支付数额为________的违约金｡

12.侵权风险责任承担条款

(1)转让方应当保证自己是本非专利技术的合法所有者,而且在合同订立时尚未被他人申请专利｡否则,由此引起侵害他人合法权益的,应当由转让方承担法律责任;

(2)在本合同履行过程中,如出现他人就同一技术申请专利或获得专利权的情况,受让方有权解除合同｡由此造成的损失应当由双方当事人按如下比例合理分担:________｡

13.本合同争议的解决办法:________________｡

14.名词和术语的解释:________________｡

本合同自当事人双方签字盖章后生效｡

转让方负责人(或授权代表)签名:________(盖章)签字时间:__________签字地点:__________开户银行:__________帐号:______________

受让方负责人(或授权代表)签名:________________(盖章)签字时间:________签字地点:________开户银行:________帐号:____________

转让方担保人(名称):________地址:______________负责人(或授权代表)签字:________(公章)签字时间:________签字地点:__________

受让方担保人(名称):______地址:____________负责人(或授权代表)签字:________________(公章)签字时间:__________签字地点:________

商标代理委托合同

甲方(委托人)：________________乙方(受托人)：________________

甲方就一案委托乙方代理商标事务，现经双方协议，订立下列条款，共同遵守：_________________

一、甲方委托乙方办理的商标事务如下：_________________□商标注册申请□商标异议申请□变更商标申请人/注册人名义/地址申请□删减商品/服务项目申请□变更商标代理人申请□更正商标申请/注册事项申请□转让申请/注册商标申请□商标续展注册申请□撤销连续三年停止使用注册商标申请□商标注销申请□注册人死亡/终止注销商标申请□补发变更/转让/续展证明申请□补发商标注册证申请□提供商标注册证明申请□提供优先权证明文件申请□商标使用许可合同备案申请□商标使用许可合同备案变更/提前终止申请□商标专用权质押登记申请□撤回商标注册申请申请□撤回商标异议申请□商标评审事宜□其他：_________________具体委托事项包括：________________不包括：________________

二、费用三、双方权利、义务

1、乙方接受甲方的委托，指派商标代理人、担任甲方代理人;如指派的代理人因故中途不能执行任务，乙方应负责另行指派其他代理人接替，并及时通知甲方。

2、乙方依法对商标内容负有保密义务。

3、甲方可以取消与乙方的委托关系，需以书面的形式通知乙方，但所交费用不予退还，并赔偿由此给乙方造成的损失。

4、乙方对商标局的通知或决定需甲方办理的，应以书面或电话的方式通知甲方，通讯地址以本合同联系人地址为准。书面通知以挂号信函寄给甲方，甲方联系方式如有变更应及时以书面形式通知乙方，如因此而导致答复期限耽误的责任由甲方负责。

四、其他事项

1、本合同自双方签章之日起生效。若委托事项为商标申请注册，则乙方工作至该申请取得“商标注册证”，或该申请被商标局被驳回之日。

2、本合同一式两份，双方各执一份。

甲方：________________乙方：________________

技术传授合同范本

订立合同双方：

______县______公社(乡)______大队(村)______生产队社员：______，以下简称甲方;

______县____公社______大队______生产队社员：______，以下简称乙方.

为了发展农村商品生产，提高______生产的技术水平，提高经济效益，经甲乙

双方充分协商，特签订本合同，以便双方共同遵守.

一，应乙方邀请，甲方到乙方居住地传授______生产的技术.合同期限为_____年___月，即从一九______年____月____日起至一九______年____月____日止.

二，至合同期满，甲方保证乙方达到如下技术水平：

____________________________________________________________________

三，乙方负责提供甲方传授________生产技术所必需的资金______元，提供生产设备_______________，保障___________原料的及时供应.乙方应严格服从甲方的技术指导.

四，在合同执行期间，乙方每月付给甲方报酬______元，按月结算(或合同期届满统一结算).甲方的食宿由乙方负责安排，费用由______方负担.

五，合同期届满，如甲方的传授指导没有达到合同规定的技术要求，除退回乙方付给的报酬，赔偿乙方的一切损失外，还应向乙方偿付违约金______元.如甲方中止执行合同，除应赔偿乙方的一切费用支出外，应向乙方偿付违约金______元.如乙方不按合同规定的时间付给甲方报酬，迟付一日，应按迟付金额的______%偿付给甲方违约金.如乙方中止执行合同，应付给甲方合同期内的全部报酬.

六，合同生效后，任何一方不得任意变更或解除合同.合同中如有未尽事宜，须经甲乙双方共同协商，作出补充规定，补充规定与本合同具有同等效力.

七，如遇人力不可抗拒的灾害造成合同无法履行时，由双方协商解决.

八，其他：______________________________________________________________.

本合同正本一式两份，甲乙双方各执一份.合同副本一式______份，交生产队，大队，公证处(如经过公证)……各留存一份.

甲方盖章(或签名)：__________

签约日期：

乙方盖章(或签名)：__________